Below is instructions on how to configure the Multi-Squeeze in TradeStation.

Configure Multi-Squeeze on Tradestation

Setup multi time frame “label” studies in Tradestation in this 3 Part Video Series

Part 1

Part 2

Part 3

Click HERE to download the work spaces used in the above videos.

SETUP

Once you have completed the install using the Import Wizard, you are almost ready to add the indicator to your charts.

Step 1: 

 Adding 5 Minute, 15 minute, 30 minute, 60 minute, and 120 minutes background data.

First you will need to set up your background data on your charts in order for the indicator to properly display. 

To do this you will need to add  5 streams of background  symbol data.

Right click on the background of the chart and select  Insert Symbol…

Be sure the box for “Prompt for format” is checked and click Plot

Under “Settings” select Minute then enter 120 in the Minute Bar field, and make sure “Range” is set to 30 days back. 

Then under the “Scaling” tab, you’ll need to set the Sub-Graph: to Hidden

Finally click  OK.

You will need to do this for the rest of the time frames to be displayed 60 Minute, 30 Minute, 15 Minute and 5 Minute.

Once you have ALL of your required time frames (120 minute, 60 Minute, 30 Minute, 15 Minute and 5 Minute …. etc.) of these background symbols inserted you can add the indicator to your chart. 

Right click on the chart and select  Insert Analysis Technique…

Select the  ST Multi Squeeze Indicator and add it to your chart and you should be all set.